Ductile iron single range flange
Universal straight fittings, stepped fittings and flange adapters for cast iron, ductile iron, steel, uPVC and asbestos cement pipes.
Ductile iron pe pipe single rang
Working pressures may vary from 10 to 16 bar depending on the application. The flange design of the adaptors is suitable for various international variations like DN, BS and ANSI.
Ductile iron wide range flange a
Flange adaptor couplings provide an effective means for inserting a flange into a pipeline for connection to another flanged component or valve. These adaptors are suitable for use in potable water; non-potable water and wastewater pipelines.
WHITE BAND expansion joints
The main body of silicone rubber joints for food production enterprises is made of nylon cord as the reinforcing material, which is vulcanized under heating and pressure conditions. Food grade rubber joints are used in cold water,
Dual Card Pipe Connectors
Pipe repair clamp is a kind of pipe plugger for repairing pipes, also known as Hafjoint, the upper and lower parts are sealed with sealing strips and fastened as a whole by bolts and worms.

Installation and application scope of the fillet connection flexural rubber joint

May-23-23 Visits:221

Installation and application scope of the fillet connection flexural rubber joint
Installation instructions:

1 . The installation of rubber soft joint is strictly prohibited beyond the displacement limit.
2 . When the rubber joint is installed flat, suspended or vertically, the actual working axial displacement pressure of the rubber joint is less than the supporting force of the pipeline.
3 . The pipe must have fixed bracket or fixed bracket, and the force of the fixed bracket must be greater than the axial force.
4 . For vertical installation and overhead installation, corresponding fixed brackets and force-bearing brackets should be installed at both ends of the product to prevent pulling off after working under pressure.
5 . Keep away from heat source during installation, and forbid the use of media that do not meet the requirements of this product.

Due to the good comprehensive performance of threaded rubber joints, they are mainly used for the lifting and conveying of raw water and sewage, feed water and cooling circulating water of thermal power plants, pipeline conveying of chemical substances in metallurgical industry, condensate water, chemical industry and petrochemical industry. Cooling, dilution and other industries long and short distance pipeline flexible connection. Since rubber has high abrasion resistance, it is also suitable for low-temperature conveying of particles, powders and gases in various industries.

The use and installation of sleeve compensator

Vibration and noise reduction is one of the properties of rubber joints

Product knowledge

Installation and application scope of the fillet connection flexural rubber joint

Leave Your Message